Understanding the New SEER 2 Rating and Why It Matters

Energy efficiency is more than just a buzzword; it’s an essential consideration for homeowners who want to save money and who also want to support environmental sustainability. The introduction of new SEER 2 rating standards in 2023 marks a substantial shift in how we view cooling efficiency. These changes affect new HVAC installations as well as ongoing AC maintenance and repairs. Explore the nuances of these changes and why they matter to you.

The Basics of SEER and SEER 2

SEER, short for seasonal energy efficiency ratio, is the standard metric used to assess the cooling efficiency of air conditioning models. The higher the SEER rating, the more energy efficient the system and the lower the operating costs.

SEER is computed by dividing the cooling output during a typical cooling season—measured in British thermal units, or BTUs—by the energy consumed in the process as measured in watt-hours. These calculations are done under specific test conditions to ensure consistency.

SEER 2 is the next generation of AC efficiency ratings. It utilizes revised testing methods to provide a more accurate representation of real-world performance. Consequently, you should be prepared to see that AC efficiency ratings with a “2” after them will be lower, even though they reflect the same performance.

SEER isn’t the only rating that’s changing in 2023. A similar cooling rating called the energy efficiency ratio (EER) is also shifting to a new standard called EER 2. And, heat pumps have a heating-related rating that evaluates wintertime performance. It’s referred to as heating seasonal performance factor (HSPF), which is also changing to HSPF 2 based on new, more exacting testing requirements.

New SEER Rating Standards for 2023

These changes might make you wonder—what are the new SEER rating standards for 2023? The Department of Energy (DOE) has set differing minimums for the Northern and Southern United States. As expected, the South has tighter requirements because this region has to depend more heavily on air conditioning. Here’s what to know when shopping for a new air conditioning system or heat pump:

• The 2023 minimum rating for air conditioners in Northern states is 14 SEER, which translates to 13.4 SEER 2.
• The 2023 minimum rating for air conditioners in Southern states is 15 SEER, which is equivalent to 14.3 SEER 2.
• The 2023 minimum EER rating only applies to air conditioners installed in Southwestern states. It’s 12.2 EER, which is the same as 11.7 EER 2.
• The 2023 minimum ratings for heat pumps apply nationwide. They are 15 SEER (14.3 SEER 2) and 8.8 HSPF (7.5 HSPF 2).

Why SEER 2 Matters for Homeowners

The transition to SEER 2, EER 2 and HSPF 2 is essential for several reasons.

Cost Savings

The more accurate measurements provided by SEER 2-rated units empower homeowners to make educated decisions about new HVAC installations, possibly leading to reduced energy bills over the system’s life span.

Environmental Impact

Energy-efficient systems with a high SEER 2 rating consume less energy. This decreases your home’s carbon footprint, contributing positively to global environmental protection efforts.

Regulatory Compliance

Adhering to the newly released SEER rating standards and understanding the equivalences between SEER and SEER 2 can help homeowners abide by the latest regulations. Be aware, HVAC companies are responsible for installing equipment that meets new testing requirements.

In the North, pre-SEER 2 air conditioners can still be installed in 2023, just as long as they were produced before January 1. However, in the South, only SEER 2-compliant AC units can be installed after January 1. If an installer breaches these regulations and is cited by the DOE, they must replace the non-compliant AC unit at no cost to the homeowner.

SEER 2 and New HVAC Installations

If you’re thinking about buying a new air conditionerair conditioning system} in 2023, you probably will see SEER or SEER 2 ratings depicted on the tag. Either rating may be considered compliant, if it meets the regional minimum.

However, it’s very important to note that the new SEER rating standards only apply to systems purchased and installed after January 1, 2023. Existing systems installed prior to this date don’t need to be replaced if they still function properly. This exception ensures homeowners aren’t burdened by more expenses but are still able to encourage future investments in more energy-efficient options.

Embrace SEER 2 with Confidence with Calverley Service Experts

Comprehending SEER 2 is about more than just grasping a new technical concept. Rather, it’s about aligning your home with the changing landscape of energy efficiency and environmental stewardship. SEER 2 brings a more accurate measurement to the table, impacting the way homeowners approach new HVAC installations.

Calverley Service Experts is ahead of the curve when it relates to this emerging age of HVAC efficiency. Our commitment to excellence, professionalism and affordable financing sets us apart. We even guarantee your 100% satisfaction, so you can move forward with confidence. From teaching homeowners about the new SEER rating standards to offering SEER 2-compliant HVAC installations in Fort Worth, the team at Calverley Service Experts is here for you.

Reach out to Calverley Service Experts to discover how we can help you adapt to the new SEER rating standards. Together, we’ll help you create a more energy-efficient home tailored to your needs and aligned with the future of cooling technology. Call 817-380-5647 today to schedule your appointment for AC service in Fort Worth.